BUILDING CIVIL ITEMS-3

		DOORS FRAMES (COLOUR COATED STEEL SECTIONS) & SHUTTER USING CEMENT BONDED PARTICLE BOARD AS PER IS 14276:
724 TO 727	BMT-N.40 to BMT-N.43	ITEM DELETED
728	BMT-N.44	Supplying and fixing door shutter, with shutter frame and infill panel made from PVC material conforming to IS: 10151-1982, the shutter frame made out of PVC extruded sections having overall dimension of 47 mm x 33 mm with wall thickness of 1.2mm + 0.3mm with usual process variation, the shutter frame with tapered shape to provide better grip to the infill panel end to drain out the water The Infill panel is made out of PVC Sections having Overall Dimensions of 200 mm x 20 mm with wall thickness of 1mm + 0.2mm, the shutter frames mitre cut and joined at the corner, by providing Polymeric “ L” type corners to take	1 Sqm	910
		hardware & fixtures fixed with 10-20mm counter sunk fully threaded parallel shank steel screws, all the hardware locations reinforced with special polymeric bars as per drawings, stickers showing locations of different hardware pasted on the shutter, the infill panels joined by tongue and groove method.
729	BMT-N.45	Providing & Fixing of Scientific Doors with metal door frames and door shutters made of galvanize steel (base steel as per IS 513 of 0.58 mm thick D quality, galvanized as per IS 277 with Zinc of 120 GSM)coated with Zinc Phosphate Primer to receive any paint on site or finished with Thermosetting Polyurethane paint of Aliphatic Grade providing high levels of scratch resistance and durability/Epoxy polyester powder for powder coating paint thickness 50-60 microns (Dry film thickness) outer frame section of 100 x 58 mm x 1.2 mm thick, shutter section of 0.80 mm thick galvanized steel sheet pressed (roll formed) for 46mm thick fully flush, double skin door shell seam joints at stile edges, in-fill of honeycomb kraft paper used to give the required rigidity and effective acoustic insulation with 6” Tower bolt – 1 No., 6” D handles – 2 Nos., 10” Aldrop – 1 No., Butt Hinges – 3 Nos, Mortise Lock of approved quality – 1 No, frames fixed to the concrete/masonry wall by means of self expanding screws complete for finished item of work for Single leaf Door	1 Sqm	9348
730	BMT-N.46	Providing & Fixing of Scientific Doors with metal door frames and door shutters made of galvanize steel (base steel as per IS 513 of 0.58 mm thick D quality, galvanized as per IS 277 with Zinc of 120 GSM). coated with Zinc Phosphate Primer to receive any paint on site or finished with Thermosetting Polyurethane paint of Aliphatic Grade providing high levels of scratch resistance and durability/Epoxy polyester powder for powder coating paint thickness 50-60 microns (Dry film thickness) outer frame section of 100 x 58 mm x 1.2 mm thick, shutter section of 0.80 mm thick galvanized steel sheet pressed (roll formed) for 46mm thick fully flush, double skin door shell seam joints at stile edges, in-fill of honeycomb kraft paper used to give the required rigidity and effective acoustic insulation with 6” Tower bolt – 2 Nos., 6” D handles – 2 Nos., 10” Aldrop – 1 No., Butt Hinges – 6 Nos, Mortise Lock of approved quality – 1 No, frames fixed to the concrete/masonry wall by means of self expanding screws complete for finished item of work for Double leaf Door	1 Sqm	9971
731	BMT-N.51	Providing & fixing 30 mm thick solid panel PVC door shutter consisting of frame made out of 19 guage M.S tube of 19 x 19 mm for stiles, top & bottom rail, with a coat of primer of approved make. M.S. Frame covered with 5 mm thick heat moulded PVC “C” channel of size of 30 x 50 mm forming stiles, 5 mm thick 75 mm wide PVC sheet for top, lock & bottom rail on either side 20 mm wide cross PVC sheet as gap insert for top & bottom rail, panelling of 10mm(+/-)( 5mm+5mm)” thick PVC sheet fitted in the M.S. frame welded /sealed to the stiles, on either side joined	1 Sqm	2750
		together with solvent cement adhesive etc., additional 5 mm thick PVC strip of 20 mm width stuck on the interior side of the C channel using solvent cement, complete as per direction of Engineer–in–charge, manufacturers specification.
732	BMT-N.53	Supplying & fixing SINGLE PANEL 30 mm thick PVC DOOR, door shutters with shutter frame and Infill panel made from PVC material, the shutter frame made out of PVC extruded sections having overall dimensions of 6 0mm x 30 mm with wall thickness of 1.3 mm ± 0.3 mm, with the Infill panel made out of multi chambered seamless hollow PVC extruded panel having overall dimensions of 610 mm x 20 mm having wall thickness 1 mm ± 0.2 mm with the shutter frame meter cut and joined at corners and all the hardware locations reinforced with special polymeric bars as per drawing including providing special PVC braket on hinge side, etc complete	1 Sqm	2350
733	BMT-N.55	Supply & Fixing of Powder Coated Mild Steel doors, frames & shutters made of Skin pass galvanized Iron sheet conforming to Base Steel as per IS 513 “D” Quality, Galvanized as per IS 277 with Hot Zinc Coating of 120 grams / Sq.Mtr with powder coating of thickness 60-65 Microns, frame with 1.2mm thick Skin pass Galvanized Iron sheet formed to single rebate profile of ize 100 mm X 58 mm and filled with in-fill Polyurethane foam, the Door Shutters are with 0.80 mm thick Skin pass Galvanized Iron Sheet formed to provide a 46 mm thick fully flush, double skin door shell with Lock Seam joints at stile edges, fitted with in-fill of Honeycomb Kraft Paper and coated with polyester powders of Pure polyester/ epoxy polyester or polyurethane powder for powder coating of thickness 60 – 65 microns and are coated with Zinc Phosphate Primer to receive any paint on site or finished with Thermosetting Polyurethane paint of Aliphatic Grade providing high levels of scratch resistance and durability, the Shutter provided with 6 MM clear float vision glass in Circular, Square or Rectangular shapes, Stainless Steel Ball Bearing Butt Hinges 3 mm thick fixed flush to the frame and shutter (Profile 102x76x3mm thick).Mortise Sash Lock with Lever Handles, Mortise Dead Bolt, etc for industrial, commercial, residential, cleanroom applications	1 Sqm	9902
734	BMT-N.56	Supply & Fixing of Stainless steel doors, frames & shutters made of stainless steel grade 304 of hairline finish, frame with 1.2mm thick formed to single rebate profile of ize 100 mm X 58 mm and filled with in-fill Polyurethane foam, the Door Shutters are with 0.80 mm thick Stainless steel Sheet formed to provide a 46 mm thick fully flush, double skin door shell with Lock Seam joints at stile edges, fitted with in-fill of Honeycomb Kraft Paper, the Shutter provided with 6 MM clear float vision glass in Circular, Square or Rectangular shapes, Stainless Steel Ball Bearing Butt Hinges 3 mm thick fixed flush to the frame and shutter (Profile 102x76x3mm thick).Mortise Sash Lock with Lever	1 Sqm	18566
1	2	3	4	5
		Handles, Mortise Dead Bolt, etc for industrial, commercial, residential, cleanroom applications.
735	BMT-N.57	Supply & Fixing of Powder Coated Fire Rated doors, frames & shutters made of Skin pass galvanized Iron sheet conforming to Base Steel as per IS 513 “D” Quality, Galvanized as per IS 277 with Hot Zinc Coating of 120 grams / Sq.Mtr with powder coating of thickness 60-65 Microns, frame with 1.2mm thick Skin pass Galvanized Iron sheet formed to double rebate profile of ize 143 mm X 58 mm with maximum bending radius of 1.4 mm and filled with in-fill Polyurethane foam, the Door Shutters are with 0.80 mm thick Skin pass Galvanized Iron Sheet formed to provide a 46 mm thick fully flush, double skin door shell with Lock Seam joints at stile edges, fitted with in-fill of Honeycomb Kraft Paper and coated with polyester powders of Pure polyester/ epoxy polyester or polyurethane powder for powder coating of thickness 60 – 65 microns and are coated with Zinc Phosphate Primer to receive any paint on site or finished with Thermosetting Polyurethane paint of Aliphatic Grade providing high levels of scratch resistance and durability, the Shutter provided with 6 MM clear float vision glass in Circular, Square or Rectangular shapes, Stainless Steel Ball Bearing Butt Hinges 3 mm thick fixed flush to the frame and shutter (Profile 102x76x3mm thick).Mortise Sash Lock with Lever Handles, Mortise Dead Bolt, etc for 120 minutes Fire Rated door conforming to IS:3614 (Part2) 1992	1 Sqm	11758
736	BMT-N.58	Supply & Fixing of Powder Coated Fire Rated doors, frames & shutters made of Skin pass galvanized Iron sheet conforming to Base Steel as per IS 513 “D” Quality, Galvanized as per IS 277 with Hot Zinc Coating of 120 grams / Sq.Mtr with powder coating of thickness 60-65 Microns, frame with 1.2mm thick Skin pass Galvanized Iron sheet formed to double rebate profile of ize 143 mm X 58 mm with maximum bending radius of 1.4 mm and filled with in-fill Polyurethane foam, the Door Shutters are with 0.80 mm thick Skin pass Galvanized Iron Sheet formed to provide a 46 mm thick fully flush, double skin door shell with Lock Seam joints at stile edges, fitted with in-fill of Honeycomb Kraft Paper and coated with polyester powders of Pure polyester/ epoxy polyester or polyurethane powder for powder coating of thickness 60 – 65 microns and are coated with Zinc Phosphate Primer to receive any paint on site or finished with Thermosetting Polyurethane paint of Aliphatic Grade providing high levels of scratch resistance and durability, the Shutter provided with 6 MM clear float vision glass in Circular, Square or Rectangular shapes, Stainless Steel Ball Bearing Butt Hinges 3 mm thick fixed flush to the frame and shutter (Profile 102x76x3mm thick).Mortise Sash Lock with Lever Handles, Mortise Dead Bolt, etc for 60 minutes Fire Rated door conforming to IS:3614 (Part2) 1992	1 Sqm	11140
737	BMT-N.59	Supply & Fixing of Stainless steel Fire Rated doors,	1 Sqm	17681
		frames & shutters made of Stainless steel of 304 grade hairline finish, frame with 1.2mm thick Stainless steel of 304 grade hairline finish sheet formed to double rebate profile of ize 143 mm X 58 mm with maximum bending radius of 1.4 mm and filled with in-fill Polyurethane foam, the Door Shutters are with 0.80 mm thick Stainless steel of 304 grade hairline finish Sheet formed to provide a 46 mm thick fully flush, double skin door shell with Lock Seam joints at stile edges, fitted with in-fill of Honeycomb Kraft Paper and coated with polyester powders of Pure polyester/ epoxy polyester or polyurethane powder for powder coating of thickness 60 – 65 microns and are coated with Zinc Phosphate Primer to receive any paint on site or finished with Thermosetting Polyurethane paint of Aliphatic Grade providing high levels of scratch resistance and durability, the Shutter provided with 6 MM clear float vision glass in Circular, Square or Rectangular shapes, Stainless Steel Ball Bearing Butt Hinges 3 mm thick fixed flush to the frame and shutter (Profile 102x76x3mm thick).Mortise Sash Lock with Lever Handles, Mortise Dead Bolt, etc for 120 minutes Fire Rated door conforming to IS:3614 (Part2) 1992
738	BMT-N.60	Supply & Fixing of Stainless steel Fire Rated doors, frames & shutters made of Stainless steel of 304 grade hairline finish, frame with 1.2mm thick Stainless steel of 304 grade hairline finish sheet formed to double rebate profile of ize 143 mm X 58 mm with maximum bending radius of 1.4 mm and filled with in-fill Polyurethane foam, the Door Shutters are with 0.80 mm thick Stainless steel of 304 grade hairline finish Sheet formed to provide a 46 mm thick fully flush, double skin door shell with Lock Seam joints at stile edges, fitted with in-fill of Honeycomb Kraft Paper and coated with polyester powders of Pure polyester/ epoxy polyester or polyurethane powder for powder coating of thickness 60 – 65 microns and are coated with Zinc Phosphate Primer to receive any paint on site or finished with Thermosetting Polyurethane paint of Aliphatic Grade providing high levels of scratch resistance and durability, the Shutter provided with 6 MM clear float vision glass in Circular, Square or Rectangular shapes, Stainless Steel Ball Bearing Butt Hinges 3 mm thick fixed flush to the frame and shutter (Profile 102x76x3mm thick).Mortise Sash Lock with Lever Handles, Mortise Dead Bolt, etc for 60 minutes Fire Rated door conforming to IS:3614 (Part2) 1992	1 Sqm	16186
739	BMT-N.61	Supply & Fixing of Lead Lined Clean room doors frames and shutters made of Skin pass galvanized Iron sheet (Conform to Base Steel as per IS 513 “D” Quality, Galvanized as per IS 277 with Hot Zinc Coating of 120 grams / Sq.Mtr).with powder coating of thickness 60-65 Microns, frame of 1.60mm thick galvanized steel sheet (Conform to IS 277) formed to Single/double rebate profile of size 100mm X 58mm/ 143x58mm, door frames with a single / multi Layer of Lead sheet varying thickness from 3mm /1mm to 2mm depends on radiation level, the shutter with 1.2 mm thick Galvanized Steel Sheet (Conform to IS 277)	1 Sqm	13329
		formed to provide a 46mm thick fully flush, double skin door shell with Lock Seam joints at stile edges with a single / multi Layer of Lead sheet varying thickness from 3mm /1mm to 2mm depends on radiation level, the lead sheets extend the full width and height of the door, Lead thickness is equal to the shielding in the adjacent wall, the door frames and door shutters are coated with polyester powders of Pure polyester/ epoxy polyester or polyurethane powder for powder coating of thickness 60 – 65 microns, coated with Zinc Phosphate Primer to receive any paint on site or finished with Thermosetting Polyurethane paint of Aliphatic Grade providing high levels of scratch resistance and durability, hardware with Stainless Steel Ball Bearing Butt Hinges 3 mm thick fixed flush to the frame and shutter etc complete for finished item
740	BMT-N.62	Supply & Fixing of Lead Lined Stainless steel Clean room door frames and shutters made of Stainless steel grade of 304 hairline finish, frame with 1.60mm (16SWG) thick hairline finish Stainless steel grade of 304 formed to Single/double rebate profile of size 100 mm x 58mm/ 143 x 58 mm, door frames with a single / multi Layer of Lead sheet varying thickness from 3mm /1mm to 2mm depends on radiation level, the shutter with 1.2 mm thick hairline finish Stainless steel grade of 304 formed to provide a 46mm thick fully flush, double skin door shell with Lock Seam joints at stile edges with a single / multi Layer of Lead sheet varying thickness from 3mm /1mm to 2mm depends on radiation level. The lead sheets extend the full width and height of the door. Lead thickness is to be equal to the shielding in the adjacent wall. Hardware can be provided with Stainless Steel Ball Bearing Butt Hinges 3 mm thick fixed flush to the frame and shutter etc complete for fisnihed item of work	1 Sqm	21041
741	BMT-N.66	ITEM DELETED
742	BMT-N.67	A) Specification for Foamed PVC Door Frame & ABS Shutters: Providing of Factory made prelaminated FPVC (Foamed Polyvinyl Chloride) Door frame of the size 105x40mm with a wall thickness of 10mm made out of extruded rigid FPVC profile mitre joined with 6 Nos. of 50mm long screw. The door frame shall be fixed to the wall by using 80mm long screws through the frame with the help of PVC fasteners of 3 no's to be provided for each vertical member,GI stiffners of ("U" chanel of size 29x9x1mm, 150mm long) -3 no's at hinge point,Frame reinforcement of("U" GI chanel of size 46x22x.06mm),Bottom tie rod of ("U" GI chanel size of 15x15x1mm) etc. complete as per manufacturers specification for finished item of work. Maximum door frame size : 980 x 2070 . B) Providing of 35mm thick Facotry made Prelaminated ABS (Acrolynitrile Butadyne Styrene) Door shutter moulded in different designs, consisting of all round Frame made out of water proof solid foam PVC bar of size 20x32mm, reinforced by 32x 32mm - 2 nos. for vertical made out of LVL (Laminated Veneer Lumber), core material of 32 mm thick	Each	14189
		high density craft paper honey comb board, sandwiched on both sides with prelaminated ABS sheet thickness of 1.5mm . PVC edge banding of size 0.45mm on the vertical sides. Hardware made out of steel coated butterfly hinges - 3 Nos. for each shutter and ISI make S.S round lock completes for finished item of work. Maximum shutter size of : 910 x 2030 mm
743	BMT-N.69	Supply and fixing of Bath room / Toilet door shutter with 16mm laminated (IS 14276) door shutter with all-round „U? lipping of PPS section of size 12mm X 18mmX 12mmX0.6mm thickness with a hardware of 12mm dia X200mm long aluminum aldrop – 2 nos( ISI make)2 No of 125mm long handles(ISI make) and also 3 no Of IS304 grade Patee Hinges 3mmX12mmX180mm long with pole receiver of 10mm dia pole X40mm long welded on 2mm X40mm(ss304) plates works as receiver for RT patte hinges. The price inclusive of all material at site	1 Sqm	2265
744	BMT-N.70	Supply and fixing of toilet door shutter with frame made of M.S. door frame of 5mmX48mmX48mm (L angel) as all- round frame the frame is coated with one coat of red oxide and two coats of enamel of approved color. For shutter and the shutter is made with 16mm laminatedshutter with all- round „U? Lipping of PPS section of 12mmX18mmX12mmX0.60mm, along hardware of 200m long and 12mm dia aluminum aldrop( ISI make)2 Nos, 2Nos of 125m m handle, 3 Nos of RT patte hinges IS 304gr SS 2mmX12mmX180mm long with a pole receiver of 10mmDia X 40mm by welded on 3mmX40mm SS 304, plate it works as receiver for RT Patee hinges it is welded to M.S. angle . M.S. angle will be fixed to wall of self expandable screws and caps.	1 Sqm	3230
745	BMT-N.73	Door shutter with shutter frame and Infill panel made from PVC material conforming to IS: 10151:1982. The shutter frame is made out of PVC extruded sections having overall dimensions of 100mm X 30mm, with two self extruded grooves at 40mm & 50mm on front surface. The Infill panel is made out of multi chambered seamless hollow PVC extruded panel having overall dimensions of 610 mm X 20 mm. The shutter frame shall be meter cut and joined at corners by means of plastic brackets. Stickers showing locations of different hardware will be pasted on the shutter. ALL Dimensions are in MM.	Sqm.	960
746	BMT-N.74	The shutter frame made out of PVC extruede section having overall dimensions of 59mm x 24mm with wall thickness of 1.0mm +/-0.3mm with usual process variation corresponding to the Sintex Code No.DWUF-302. The shutter frame is given tampered shape to provide better grip to the infill panel and to drain out the water.The infill panel is made out of seamless one piece multi chambered PVC extruded section having overall dimension of 610mm x 20mm with wall thickness of 1mm +/-0.2mm with usual process variation corresponding to the Sintex code No.SPUF-128. The shutter frame shall be mitre cut and joined at the corner polymeric	1 Sqm	1924
		“L? Type corners shall be provided at the corners to take up hardwares & fixtures and shall be fixed with 19 x 8mm counter sunk-fully threaded parallel shank steel screws. All the hardware locations shall be reinforced with special polymeric Bars.
747 to 750	BMT-N.75 to BMT-N.78	ITEMs DELETED
751	BMT-N.09	Providing and fixing PVC door cladding to the flush doors shutters . For the new doors it shall be pasted with Fevicol SSR 998 or nailed to the old doors. complete as per direction of Engineer –in – charge, manufacturers specification and drawing - 1 mm thick	1 sqm	350
752	BMT-N.10	Providing and fixing PVC door cladding to the flush doors shutters . For the new doors it shall be pasted with Fevicol SSR 998 or nailed to the old doors. complete as per direction of Engineer –in – charge, manufacturers specification and drawing - 1.5 mm thick	1 sqm	375
753	BMT-N.11	Providing and fixing PVC door cladding to the flush doors shutters . For the new doors it shall be pasted with Fevicol SSR 998 or nailed to the old doors. complete as per direction of Engineer –in – charge, manufacturers specification and drawing - 2.0 mm thick	1 sqm	431
754	BMT-N.84	Providing and fixing factory made uPVC white colour casement/Casementcum fixed glazed door comprising of uPVC multi-chambered frame, sashand mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll formingprocess of required length (shape & size according to Upvc profile),uPVC extruded glazing beads of appropriate dimension,EPDMgasket,zinc alloy (white powder coated) 3D hinges and one handle oneach side of panels along with zinc plated mild steel multi point lockinghavingtransmission gear, cylinder with keeps and one side key, G.Ifasteners100 x 8 mm size for fixing frame to finished wall and necessarystainlesssteel screws, etc. Profile of frame & sash shall be mitred cut andfusion welded at all corners, mullion (if required) shall be also fusionweldedincluding drilling of holes for fixing hardware's and drainage ofwater etc.After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required sizeand of approved quality, all complete as per approved drawing & directionof Engineer-in-Charge inclusive of cost of Single / double glass panes and silicon sealent . Note: For uPVC frame, sash and mullion extruded profiles minus 5%tolerance in dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be acceptedbut no extra payment on this account shall be made.
755	BMT-N.84.A	Casement door with 3D hinges made of (big series) frame	1 sqm	8217
		67x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm).
756	BMT-N.84.B	Casement door with top hung ventilator with 3D and S.S. frictionhinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 64 mm, sash 67 x 110 mm & mullion 67 x 80 mm all having wall thickness of 2.3 ±. 0.2 mm and single glazing bead / double glazing bead of appropriate dimension.(Area of doorupto 2.50 sqm)	1 sqm	8395
757	BMT-N.85	Providing and fixing factory made uPVC white colour sliding glazed doorcomprising of uPVC multi-chambered frame with in-built roller track andsash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanizedmild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension uPVCextruded glazing beads, uPVC extruded interlock and uPVC extrudedInline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy(white powder coated) handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmissiongear with keeps, zinc alloy (white powder coated) cresent lock (ifrequired), stainless steel (SS 304 grade) body with adjustable doublenylon rollers (weight bearing capacity to be 120 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steelscrews etc. Profile of frame & sash shall be mitred cut and fusion weldedat all corners, including drilling of holes for fixing hardware's and drainageof water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backerrod of required size and of approved quality, all complete as per approveddrawing & direction of Engineer- in-Charge inclusive of cost of Single / double glass panes,wire mesh and silicon sealent . Note: For uPVC frame and sash extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable. Variationin profile dimension in higher side shall be accepted but no extra payment on this account shall be made.
758	BMT-N.85.A	Two track two panels sliding door made of (big series) frame 67 x 50 mm & sash 46 x 82 mm both having wall thicknessof 2.3 ± 0.2 mm and single glazing bead / double glazingbead of appropriate dimension. (Area of door above 2.00 sqm upto 5.00 sqm)	1 sqm	5404
759	BMT-N.85.B	Three track three panels sliding door with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of(big series) frame 116 x 45 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door above 2.00 sqm upto 5.00 sqm)	1 sqm	6996
760	BMT-N.86	Providing and fixing of factory made of High Density High	1 sqm	11249
		MoistureResistant Wood Fibre (HDHMR) single shutter Duradoor made up of FRAME: Door frame manufactured with High Density High MoistureResistant Wood Fibre (HDHMR) of 36mm width x 100mm depth , laminated with 0.2mm thick PVC Foil using hot press andPUR adhesive, fitted with Gasket for energy efficiency and noise protection,affixed to the wall using high strength expandable PU Foam/ self-expandable wall fixing screws.Max dimensions in MM of 280 (depth) x 2440 (height)SHUTTER: Factory made 41mm thick shutter sandwiched with High Density High Moisture ResistantWood Fibre (HDHMR) of 5.5mm thick skinson both sides and HDHMR of 30mm thickness as skeleton,core of high density Honey Comb and Laminated Veneer Lumber (LVL) for holding the lock body andhardware, laminated with 0.2mm thick PVC Foil and edge-banded with 1mm thick PVCedge-band using hot press and PUR adhesives. Max dimensions in MM of 1200 (width) x 41(thickness) x 2400 (height), ARCHITRAVE: Factory made Architrave of size 80mm x 12mm fitted to pre-made grooves within the frame for addedaesthetics. Four design variants available, made with Density High Moisture Resistant Wood Fibre(HDHMR) of different thicknesses depending on the design variant, laminated with 0.2mm thickPVC Foil using hot press and PUR adhesive, fitted to the wall using strong quick actingadhesives. HARDWARE & ACCESSORIES: Imported hardware including door handles – 1 no, cylindrical magnetic lock -1 no ,SS hinges – 3 nos. Including cost and conveyance of all material, Hardware, Labour charges and transportation complete for finished item of work
761	BMT-N.87	Supply and fixing of Bath/Toilet Door frame and shutter with 8mm laminated (IS.15786)using with 50mmx35mmx1.3mmthick aluminum door frame of weight 220grm per Rft with a rebate of 30 mm for provision for shutter , shutter made with 45mmx25mmx1.3mm thick aluminum section of weight 210grms per Rft with 8mm groove to accommodate 8mm thick laminated (IS.15786) and shutter having 3nos of ss 304gr Butt hinges of 100mm long, 100mm aluminum handles -2nos, and also 2 nos of 200mmx12mm aluminum aldrops ,the rates inclusive of all labor fixing at site and 50microns Ivory powder coated for aluminum door frame and shutter sections etc complete finished item of work .	1 sqm	4872
762	BMT-N.88	Providing and fixing 28 -30 MM thick solid Wood Polymer Composite(WPC) single extruded door shutter with 3MM top and bottom rigid layer with an overall density of 750kg/Cum. It will be fixed to the frame using 3 inch /4 inch hinges. A minimum of 4 hinges will be required for fixing the door with the frame	1 sqm	3030
	IV.SUB- SECTION	CUP-BOARD DOORS
763	BMT-N.24	Supply and fixing of Cement Bonded Particle Board (IS	1 sqm	2210
		14276) cup board frames and shutters and using 16mm Cement Bonded Particle Board duly painted both sides with one coat of primer and two coats of synthetic / enamel paint of approved shade and brand including fixing of hardware like M.S. powder coated Piano hinges of size 18mm x 18mm, brass ball catches, Aluminum tower bolts and handles , Godrej locks, Fevicol, screws and nails including cost and conveyance of all materials, labor charges, all incidental and operational charges etc., complete for finished item of work at site as per the directions of Engineer in Charge.
764	BMT-N.29	Supply and fixing of Cement Bonded Particle Board (IS 14276) box type cup board using Cement Bonded Particle Board for making frame of size 100mm x 35mm using two sandwiched 16MM boards, one Cement Bonded Particle Board and one CEMENT BONDED PRE-LAMINATED PARTICLE BOARDS with plain 35mm wood lipping. The Shutters are made of 16MM thick CEMENT BONDED PRE- LAMINATED PARTICLE BOARDS (Pre-Laminated Cement Bonded Particle Board) of approved shade inclusive of hardware like M.S. powder coated Piano hinges of size ¾” x ¾” , Aluminum powder coated handles of size 4” (101.6mm), Aluminum tower bolt 4” (101.6mm) Godrej locks, screws, wood lipping and Fevicol etc., complete finish item of work.	1 Sqm	3540
765	BMT-N.71	Supply and fixing of cupboard shutter using teakwood scantling of size 50mm X50mm teakwood as outer frame and 50mm X 30 mm of size teakwood for shutter frames , 8mm thick Bison Lam as panel to each shutter consist of 2 Nos 75mm long tower bolt – 2 nos 75 mm big handle the and other shutter will have 1 no of cupboard lack , 1 No of 75 mm long handle and 75mm10mmX1mm thick SS hinges- 2 Nos for each shutter. The above frame will be fixed to the wall with screws, the rate inclusive of screws, handle, etc., complete at site of work.	1 Sqm	3710
	P.SECTION	WINDOWS (Landing cost – including loading, cost of conveyance, unloading)
	I.SUB- SECTION	OPENABLE WINDOWS
		Supply and fixing of pre-painted steel openable windows base steel as per IS 513 of -0.58 mm thick 'D" quality, galvanized as per IS 277 , finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer, section for outer frame of 46 x 52 mm section and for shutter of 46 x 46 mm section for mullion 46 x 70 mm, and section for beading should be 18 x 25 mm with 5 mm thick plain float glass fitted with Ethyl propylene Diamine monomer Gasket (EPDM) and handle made of high grade aluminium powder coated with frames fixed to the concrete /masonry wall by means of self expanding screws including 10 mm square guard bars with 6" pitch complete for finished item of work .
766	BMT-P.01	Windows: Single shutter 2'0 x 4'0 (609.6 x 1219.2 mm ) Outer frame section size of 46 x 52 mm shutter frame section size of 46 x 46 mm	1 sqm	5742
767	BMT-P.02	Windows: Double shutter 3'-0" x 4'-0" (914.4mm x 1219.2 mm) outer frame section size of 46 x 52 mm shutter frame section size of 46 x 46 mm	1 Sqm	5742
768	BMT-P.03	Windows: Double shutter 3'-0" x 4'-0" (914.4mm x 1219.2 mm) outer frame section size of 46 x 52 mm shutter frame section size of 46 x 46 mm Mullion section size of 46 x 70 mm	1 Sqm	6074
769	BMT-P.04	Windows: Double shutter 4'-0" x 4 '-0" (1219.2x12.19.2mm) outer frame section size of 46 x 52 mm shutter frame section size of 46 x 46 mm	1 Sqm	5907
770	BMT-P.05	Windows: Double shutter 4'-0" x 4 '-0" (1219.2x1219.2mm) outer frame section size of 46 x 52 mm shutter frame section size of 46 x 46 mm Mullion section size of 46 x 70 mm	1 Sqm	5907
771	BMT-P.06	Windows: Double shutter 4'-6" x 4 '-6" (1371.6x1371.6mm) outer frame section size of 46 x 52 mm shutter frame section size of 46 x 46 mm Mullion section size of 46 x 70 mm	1 Sqm	5411
772	BMT-P.07	Windows: Centre fixed both side openable shutter 5'-0" x 4'- 0" (1524x1219.2mm) outer frame section size of 46 x 52 mm shutter frame section size of 46 x 46 mm Mullion section size of 46 x 70 mm fixed beading section size of 18 x 25 mm	1 Sqm	5411
773	BMT-P.08	Windows: Centre fixed both side openable shutter 6'-0" x 4'- 0" (1828.8x1219.2mm) outer frame section size of 46 x 52 mm shutter frame section size of 46 x 46 mm Mullion section size of 46 x 70 mm fixed beading section size of 18 x 25 mm	1 Sqm	5411
774	BMT-P.09	Windows: Centre fixed both side openable shutter 6'-0" x 4'- 6" (1828.8x1371.6mm) outer frame section size of 46 x 52 mm shutter frame section size of 46 x 46 mm Mullion section size of 46 x 70 mm fixed beading section size of 18 x 25 mm	1 Sqm	5411
		Providing and fixing of Openable Windows made of pre- painted steel (Base steel as per IS 513 of 0.58 mm thick galvanized as per IS 277 with Zinc of 120 GSM), primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer and section for outer frame of 48 x 50 mm, centre mullion of 48 x 50 mm, section for shutter of 48 x 25 mm and the fixed glass beading section should be 12 x 12 mm and the outer frame and mullions to have rebate for glazed shutter with a 20 mm provision for guard bars/grills and the sections cut to length metre joined with corner bracket, centre mullion fixed with mullion cap, handle, stay, 2 nos. of stainless steel heavy duty pivot hinges provided per shutter and windows fitted with 5 mm thick plain float glass with rubber gaskets including fixing the frames in concrete/masonry wall by means of self expanding screws, Including 10mm Square guard bars with 6” (152.4mm) pitch etc., complete for finished item of work.
775	BMT-P.16	Single shutter Window 2?0”x4?0” (609.6mm x 1219.2mm). Outer frame section size of 48x50mm shutter frame section size of 48 x 25 mm.	1 Sqm	5245
776	BMT-P.17	Double shutter Window with vertical mullion 3?0” x 4?0” ( 914.4mm x 1219.2mm) outer frame section size of 48x50mm shutter frame section size of 48 x 25 mm. Mullion section size of 48x50mm.	1 Sqm	5576
777	BMT-P.18	Double shutter Window with vertical member4?0” x 4?0” (1219.2mm x 1219.2mm) outer frame section size of 48x50mm shutter frame section size of 48 x 25 mm and mullion section should be of 48x50mm.	1 Sqm	5576
778	BMT-P.19	Centre fixed both side openable shutter window 5?0”x4?0” (1524mm x1219.2mm). Outer frame section size of 48x50mm. Shutter frame section size of 48 x 25 mm. Mullion section size of 48x50mm. Fixed beading section size of 12x12mm.	1 Sqm	4914
779	BMT-P.20	Centre fixed both side openable shutter window 6?0”x4?0” (1828.8mm x1219.2mm). Outer frame section size of 48x50mm. Shutter frame section size of 48 x 25 mm. Mullion section size of 48x50mm. Fixed beading section size of 12 x 12mm.	1 Sqm	4914
		Providing & Fixing of Openable Windows with Fly-mesh made of pre-painted steel (Base Steel as per IS 513 of 0.58 mm thick galvanized as per IS 277 with zinc of 150 GSM) primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer and the section for outer frame of 72 x 55mm, centre mullion of 72 x 50mm, section for fixed glass beading section of 12 x 12 mm and section for shutters of 48 x 25 mm and outer frame & mullion sections with rebate for glazed shutters, fly mesh and a 20 mm provision for guard bars/grills and fly mesh shutter section of 20 x 40 mm and the sections cut to length metre joined with corner bracket, centre mullions fixed with mullion cap, stay, handles, latch 2 Nos of heavy duty stainless steel pivot hinges per shutter and panelled with 5mm thick plain float glass and S.S. Mesh for fly mesh shutter (304 grade), fitted using rubber gaskets including fixing the windows in the concrete/masonry wall by means of self expanding screws, including 10mm Square guard bars with 6” (152.4mm) pitch , complete for finished item of work
780	BMT-P.21	Single shutter Window 2?0”x4?0” (609.6mm x 1219.2mm). Outer frame section size of 72x50mm shutter frame section size of 48 x 25 mm.	1 Sqm	6956
781	BMT-P.22	Double shutter Window with vertical mullion 3?0” x 4?0” ( 914.4mm x 1219.2mm) outer frame section size of 72x50mm shutter frame section size of 48 x 25 mm. Mullion section size of 72x50mm.	1 Sqm	7288
782	BMT-P.23	Double shutter Window with vertical member4?0” x 4?0” (1219.2mm x 1219.2mm) outer frame section size of 72x50mm shutter frame section size of 48 x 25 mm and	1 Sqm	7288
		mullion section should be of 72x50mm.
783	BMT-P.24	Centre fixed both side openable shutter window 5?0”x4?0” (1524mm x1219.2mm). Outer frame section size of 72x50mm. Shutter frame section size of 48 x 25 mm. Mullion section size of 72x50mm. Fixed beading section size of 12 x 12 mm.	1 Sqm	6625
784	BMT-P.25	Centre fixed both side openable shutter window 6?0”x4?0” (1828.8mm x1219.2mm). Outer frame section size of 72x50mm. Shutter frame section size of 48 x 25 mm. Mullion section size of 72x50mm. Fixed beading section size of 12 x 12 mm.	1 Sqm	5797
785	BMT-P.30	ITEM DELETED
786	BMT-P.31	ITEM DELETED
787	BMT-P.32	Galvanized powder coated Casement Windows with openable shutters duly manufactured using pressed steel sections in mild steel conforming to IS 513 of having 1.0 mm thick and galvanized as per IS 277 of 120 GSM surface treatment with pure polyester powder coating of 30-40 microns thick and section for outer frame of 60x50mm, centre for mullion of 62x50mm, section for shutter of 52 x 22 mm, outer frame and mullions to have one side rebate for glazed shutter of size 24 mm and 10x10 mm square guard bars provided at 125 mm c/c the sections assembled with bolt & nut assembly with zinc-electroplated M-5 bolts, GI Handle of size 80 mm x 15 mm -1 No per shutter, 2 nos of stainless steel heavy duty pivot hinges of size 3" of SS 304 Grade per shutter, window panes with 5 mm thick plain float glass and fixed with glass beading section of 10x12 mm size with 0.8 mm thick powder coated aluminium 'U' channel and window frames fixing to the concrete/masonry wall arrangement with self expanding screws, complete for finished item of work - 1220 x 1372 or below size	1 Sqm	5168
788	BMT-P.33	Galvanized powder coated Casement Windows with openable shutters duly manufactured using pressed steel sections in mild steel conforming to IS 513 of having 1.0 mm thick and galvanized as per IS 277 of 120 GSM surface treatment with pure polyester powder coating of 30-40 microns thick and section for outer frame of 60x50mm, centre for mullion of 62x50mm, section for shutter of 52 x 22 mm, outer frame and mullions to have one side rebate for glazed shutter of size 24 mm and 10x10 mm square guard bars provided at 125 mm c/c the sections assembled with bolt & nut assembly with zinc-electroplated M-5 bolts, GI Handle of size 80 mm x 15 mm -1 No per shutter, 2 nos of stainless steel heavy duty pivot hinges of size 3" of SS 304 Grade per shutter, window panes with 5 mm thick plain float glass and fixed with glass beading section of 10x12 mm size with 0.8 mm thick powder coated aluminium 'U' channel and window frames fixing to the concrete/masonry wall arrangement with self expanding screws, complete for finished item of work - 1530 x 1372 or above size	1 Sqm	4630
789	BMT-P.34	Galvanized powder coated Casement Windows with openable shutters duly manufactured using pressed steel sections in mild steel conforming to IS 513 of having 1.0 mm thick and galvanized as per IS 277 of 120 GSM surface treatment with pure polyester powder coating of 30-40 microns thick and section for outer frame of 88x50mm, centre for mullion of 62x88 mm, section for glass and fly- proof mesh shutter of 52 x 22 mm, outer frame and mullions to have two sides rebate for glazed shutter of size 24 mm and 10x10 mm square guard bars provided at 125 mm c/c the sections assembled with bolt & nut assembly with zinc- electroplated M-5 bolts, GI Handle of size 80 mm x 15 mm - 1 No per shutter, 2 Nos of stainless steel heavy duty pivot hinges of size 3" of SS 304 Grade per shutter, window panes with 5 mm thick plain float glass and fixed with glass beading section of 10x12 mm size with 0.8 mm thick powder coated aluminium 'U' channel and fly-proof mesh of SS 304 grade fixed with 18 mm x 12 mm BT wood beading and window frames fixing arrangement to the concrete/masonry wall with self expanding screws, complete for finished item of work - 1220 x 1372 or below size	1 Sqm	6493
790	BMT-P.35	Galvanized powder coated Casement Windows with openable shutters duly manufactured using pressed steel sections in mild steel conforming to IS 513 of having 1.0 mm thick and galvanized as per IS 277 of 120 GSM surface treatment with pure polyester powder coating of 30-40 microns thick and section for outer frame of 88x50mm, centre for mullion of 62x88 mm, section for glass and fly- proof mesh shutter of 52 x 22 mm, outer frame and mullions to have two sides rebate for glazed shutter of size 24 mm and 10x10 mm square guard bars provided at 125 mm c/c the sections assembled with bolt & nut assembly with zinc- electroplated M-5 bolts, GI Handle of size 80 mm x 15 mm - 1 No per shutter, 2 Nos of stainless steel heavy duty pivot hinges of size 3" of SS 304 Grade per shutter, window panes with 5 mm thick plain float glass and fixed with glass beading section of 10x12 mm size with 0.8 mm thick powder coated aluminium 'U' channel and fly-proof mesh of SS 304 grade fixed with 18 mm x 12 mm BT wood beading and window frames fixing arrangement to the concrete/masonry wall with self expanding screws, complete for finished item of work - 1530 x 1372 orabove size	1 Sqm	5969
791	BMT-P.36	Providing & Fixing of Mesh windows made of pre-painted steel (Base Steel as per IS 513 of 0.58mm thick galvanized as per IS 277 with zinc of 120 GSM), primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer, section for outer frame of 47 x 36 mm, centre mullion of 60 x 36 mm, section mesh beading 18 x 6 mm and Fly mesh shutter section of 20 x 40 mm, the sections cut to length meter joined with corner bracket and centre mullions fixed with mullion cap, handles, latch, 2 Nos of heavy duty stainless steel pivot hinges per S.S. Mesh for fly mesh shutter (304 grade) including fixing	1 Sqm	4333
		the frames in the concrete/masonry wall by means of self expanding screws complete for finished item of work.
		Providing and fixing of Openable / Casement Windows made of pre-painted steel (Base steel as per IS 513 of 0.80 mm thick galvanized as per IS 277 with Zinc of 120 GSM), finish painted with a polyester paint of 60-65 microns thick and section for outer frame of 80 x 45 mm, centre mullion of 80 x 60 mm, section for shutter of 52 x 25 mm x 0.6 mm thick, outer frame and mullions to have rebate for glazed shutter with a provision for guard bars/grills and the sections cut to length metre joined with corner bracket, centre mullion fixed with mullion cap, 1 No. of High grade nylon latch handle, window stopper, 2 nos. of with MS Powder coated /SS ball bearing butt Hinges provided per shutter and windows fitted with 4 mm thick plain float glass with rubber gaskets including fixing the frames in concrete/masonry wall by means of self expanding screws, Including 10 mm Square guard bars with 6” (152.4mm) pitch etc., complete for finished item of work.
792	BMT-P.46	Single openable shutter window size of 2? 0” x 4? 0” (609.6 x 1219.2mm) outer frame section size of 80 x 45mm, shutter frame section size of 52 x 25mm thick	1 sqm	4625
793	BMT-P.47	Double openable shutter window Size of 3? 0” x 4? 0” (914.4mm x 1219.2mm) outer frame section size of 80 x 45mm,shutter frame section size of 52 x 25mm, vertical mullion section size of 80 x 60 mm	1 sqm	4917
794	BMT-P.48	Double openable shutter window size of 4?0” x 4?0” (1219.2mm x 1219.2mm) outer frame section size 80 x 45mm, shutter frame section size of 52 x 25 mm ,Vertical mullion section size of 80 x 60 mm	1 sqm	4917
795	BMT-P.49	Double Openable Shutter and Center Fixed window of size 5?0 x 4?0 ( 1524 x 1219.2mm)outer frame section size of 80mm x 45mm, shutter frame section size of 52 x 25mm ,Vertical mullion section size of 80 x 60 mm, beading section size of 9 x 12mm to be provided for glass holding	1 sqm	4333
796	BMT-P.50	Double Openable Shutter and Center Fixed window of size 6?0 x4?0 ( 1829.6 x 1219.2mm)outer frame section size of 80mm x 45mm , shutter frame section size of 52 x 25mm ,Vertical mullion section size of 80 x 60 mm, beading section size of 9 x 12mm to be provided for glass holding	1 sqm	4333
		Note: The above rates are for normal finish, 10% extra may be allowed for Wood Grain finish
		Providing and fixing of Openable / Casement Windows with fly mesh made of pre-painted steel (Base steel as per IS 513 of 0.80 mm thick galvanized as per IS 277 with Zinc of 120 GSM), finish painted with a polyester paint of 60-65 microns thick and section for outer frame of 100 x 45 mm, centre mullion of 100 x 60 mm, section for shutter of 52 x 25 mm x 0.6 mm thick, section for fly-shutter of 52 x 25 mm x 0.6 mm thick and fitted with stainless steel 32 gauge fly mesh of 304 grade with 144 holes per sq.inch and mullions to have
		double rebate for glazed shutter and fly-shutter with a provision for guard bars/grills and the sections cut to length metre joined with corner bracket, centre mullion fixed with mullion cap, 1 No. of High grade nylon latch handle, window stopper, 2 nos. of with MS Powder coated /SS ball bearing butt Hinges provided per shutter and windows fitted with 4 mm thick plain float glass with rubber gaskets including fixing the frames in concrete/masonry wall by means of self expanding screws, Including 10 mm Square guard bars with 6” (152.4mm) pitch etc., complete for finished item of work.
797	BMT-P.51	Single openable shutter window size of 2? 0” x 4? 0” (609.6 x 1219.2mm) outer frame Double rebate section size of 100 x 45mm, Glazed and flymesh shutter profile section size of 52 x 25mm	1 sqm	6135
798	BMT-P.52	Double openable shutter window Size of 3? 0” x 4? 0” (914.4mm x 1219.2mm) outer frame Double rebate section size of 100 x 45mm, Glazed and flymesh shutter profile section size of 52 x 25mm, vertical mullion section size of 100 x 60 mm	1 sqm	6426
799	BMT-P.53	Double openable shutter window size of 4?0” x 4?0” (1219.2mm x 1219.2mm) outer frame Double rebate section size of 100 x 45mm, Glazed and flymesh shutter profile section size of 52 x 25mm, vertical mullion section size of 100 x 60 mm	1 sqm	6426
800	BMT-P.54	Double Openable Shutter and Center Fixed window of size 5?0 x 4?0 ( 1524 x 1219.2mm)outer frame section size of 80mm x 45mm , shutter frame section size of 52 x 25mm ,Vertical mullion section size of 100 x 60 mm , beading section size of 9 x 12mm to be provided for glass holding	1 sqm	5843
801	BMT-P.55	Double Openable Shutter and Center Fixed window of size 6?0 x4?0 ( 1829.6 x 1219.2mm)outer frame section size of 80mm x 45mm , shutter frame section size of 52 x 25mm ,Vertical mullion section size of 100 x 60 mm , beading section size of 9 x 12mm to be provided for glass holding	1 sqm	5843
		Note: The above rates are for normal finish, 10% extra may be allowed for Wood Grain finish
802	BMT-P.73	ITEM DELETED
		Supplying and fixing of WINDOWS with Pre laminated Cement Bonded Particle boards and Pre-Painted Steel Sections (PPS)fabricated from pre-painted Cold rolled formed sections made of galvanized steel color coated sections (Base steel as per IS-512 D quality, galvanized as per IS-277 with Zinc of 120 gram/sqm) with total coated thickness of 0.58mm primer coated with epoxy primer of 5-7 microns thick, finish painted with polyester paint of 12- 16 microns and back coated with alkyd backer of 5-7 microns), sections for outer frame and centre mullion (duly filled with PU form of 40 kg/Cum) of 60mm x 50mm, with provision for fixing glazed shutter and the section for glazed/paneled of size 48 mm x 25 mm and another section of size 60 mm x 23 mm provided for separating glazed and
		paneled portion, the section cut to length and miter jointed with plastic corner brackets and with corner brackets for window outer frames of 50mm x 60mm, the mullion section fixed to the frame with plastic mullion cap and stiffener plates of size 60 mm x 50 mm made of 1.25mm thick CRCA electroplated provided to fix window frames to concrete/masonry, gasket for fixing glass and 10mm both sides pre-laminated cement bonded particle board and 5 mm thick color pin headed glass provided for glazing and providing guard bars of 10 mm square rods duly welded at 150 mm pitch to MS flat section of size 18 mm and 3 mm thick, and fixed to wall by means of self expansion nylon Cap (75) and electroplated wooden screws of size 100 mm, together with aluminum powder coated fittings, A) 75mm long grip handles 1 no per shutter, B) 75 mm long tower bolts 2 nos. per shutter, C) Heavy duty SS Pivot hinges 2 no?s per shutter, D) MS Powder coated telescopic stay 1 no per shutter.
803	BMT-P.76-A	Pre Laminated Cement Bonded Particle Board WINDOWS – Single shutter 2?0”x4?0” outer frame section size of 50mm x 60mm shutter frame section size of 48mm x 25mm.	1 Sqm	5237
804	BMT-P.76-B	Pre Laminated Cement Bonded Particle Board WINDOWS – Double shutter 3?0” x 4?0” outer frame section size of 50mm x 60mm shutter frame section size of 48mm x 25mm mullion section size of50mm x 60mm for outer frame.	1 Sqm	5287
805	BMT-P.76-C	Pre Laminated Cement Bonded Particle Board WINDOWS – Double shutter 3?0” x 3?0” outer frame section size of 50mm x 60mm shutter frame section size of 48mm x 25mm Mullion section size of50mm x 60mm for outer frame.	1 Sqm	5499
806	BMT-P.76-D	Pre Laminated Cement Bonded Particle Board WINDOWS – Double shutter 4?0”x4?0” outer frame section size of 50mm x 60mm shutter frame section size of 48mm x 25mm Mullion section size of50mm x 60mm for outer frame.	1 Sqm	5086
	II.SUB- SECTION	SLIDING WINDOWS
807	BMT-P.26	Providing and fixing Pre painted Steel sliding Window/Door fabricated from roll formed sections made of Galvanized steel colour coated /powder coated (Base Steel as per IS 513 „D? quality galvanized as per IS 277 with Zinc of 120 Gms./ Sq.mtr) with total coated thickness of 0.58mm. Primer Coat with epoxy primer of 5-7 microns thick, finished paint with a polyester paint of 12-16 microns thick and back coated with Alkyd backer of 5-7 microns or powder coated with pure polyester powder up to 50-60 microns thick. The External Section for two track Sliding Window should be of 44 x 59mm with a provision for bottom track insert profile of 10x9 mm made of aluminium. Section for Window glass shutter should be of 35x49mm , Section for Window Euro groove should be of 25x24mm made of plastic to accommodate standard accessories, and section for window lap strip should be of 21x4mm made of	1 Sqm	6166
		plastic. Section for Door shutter should be of 35x67mm, Section for Door Euro Groove 25x31mm made of plastic to accommodate standard accessories and size of lap strip should be of 39x41mm. The Window/Door to be panelled with 5mm thick plain float glass. The gaskets are to be made of Ethyl Propylene Diamine Manomer [EPDM]. Corner Brackets for internal and external frame to be made of glass filled nylon. Touch lock to be provided for Window Shutter. Sections are to be cut to length, joined and assembled by means of corner brackets. The above frame to be fixed to Brick/Concrete masonry by using Nylon self-expanding caps and driving MS electroplated 80mm screws into the caps through frames. The Grill for safety for windows to be made of 10mm thick square rod bars with 152mm pitch for complete item of work . For Door there will be no Safety Grill including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item of work.
808	BMT-P.27	ITEM DELETED
809	BMT-P.28	ITEM DELETED
810	BMT-P.29	ITEM DELETED
811	BMT-P.37	Providing and fixing COMPOSITE SLIDING WINDOW fabricated from roll formed sections made of Galvanized Steel colour Coated/Powder Coated (Base Steel as per IS 513 “D” quality, Galvanized as per IS 277 with Zinc of 120 grams /Sq.Mtr.) with total coated thickness of 0.58 mm, powder coated with pure Polyester Powder up to 50-60 microns thick and the section for external frame bottom of 68 x 25mm (Aluminium), External frame sides & Top of 68 x 25 mm (Aluminium), section for shutter of 59 x 23mm and Lap Strip of 30 x 7.5mm (uPVC) cut to length and mitre joined with L-bracket and 5 mm plain float Galss with Ethyl Propylene Diamine Monomer (EPDM) gasket, the corner bracket for external frame made of Aluminium „L?-Angle, Corner Bracket for internal frame made of Polyproylene, Crescent Latch, Rollers, & EPDM Gaskets for shutters, wool pile for lap strip, Bump Stop Base & Rubber for shutter stopper including fixing to brick/concrete masonry using Nylon self-expanding caps and driving MS electroplated 80mm long screws into the caps through frames and fixing 10mm square guard bars with 6” pitch centre to centre (152.4mm) completed for finished item of work	1 Sqm	5411
		Providing and fixing of Two shutter Sliding Windows made of Galvanized Steel (Base Steel as per IS 513, D quality, galvanized as per IS 277 with Zinc of 120 GSM), using factory made section powder coated with Pure polyester powder upto 50-60 microns thick with total coated thickness of 0.58 mm for Outer Frame and 0.58 mm thickness for Sliding Shutter Section, the Outer Frame for Two Tracks with Grill provision size of 90 mm x 50 mm and without grill provision is of 75 mm x 50 mm and the Window Shutter
		section of 0.58 mm x 36 mm and the outer Frame with two integrated guide tracks of 12mm width and 24mm deep for provision to slide the Shutter / sash frame and facilitates with a water drain outlet component made of PVC and the shutter frame fitted with 5mm thick plain float glass of reputed make and fixed with EPDM weathering seal resistant accessories and handle made of Alumimium 1 No. per each shutter and cut to length miter joined with corner brackets including installation of window system at site using anchor fasteners, Silicon sealant applied at the Outer frame corners inclusive of conveyance of all materials accessories, labour charges, and erection at site with complete finished item of work.
812	BMT-P.38	a) Window with Two Sliding Shutters and without Grill Outer Frame Size 75 mm x 50 mm.	1 Sqm	5411
813	BMT-P.39	b) Window with Two Sliding Shutters and with Grill Outer Frame Size 90 mm x 50 mm have a rebate of 15mm x 5 mm to fit grill made of 10mm MS Sq Rods for horizontal bars welded at a regular pitch of 150mm to 12mm x 6 mm MS flat.	1 Sqm	5647
		Providing and fixing of Three shutter Sliding Windows made of Galvanized Steel (Base Steel as per IS 513, D quality, galvanized as per IS 277 with Zinc of 120 GSM), using factory made section powder coated with Pure polyester powder upto 50-60 microns thick with total coated thickness of 0.58 mm for Outer Frame and 0.58 mm thickness for Sliding Shutter Section, the Outer Frame for three tracks with grill provision size of 105 mm x 50 mm and without grill provision is of 90 mm x 50 mm and the Window Shutter section of 58 mm x 36 mm and the outer Frame with two integrated guide tracks of 12mm width and 24mm deep for provision to slide the Shutter / sash frame and facilitates with a water drain outlet component made of PVC and the shutter frame fitted with 5mm thick plain float glass of reputed make and fixed with EPDM weathering seal resistant accessories and handle made of Alumimium 1 No. per each shutter and cut to length miter joined with corner brackets including installation of window system at site using anchor fasteners, Silicon sealant applied at the Outer frame corners inclusive of conveyance of all materials accessories, labour charges, and erection at site with complete finished item of work.
		Window with 3 shutters (center fixed shutter / Center sliding shutter / center Fly mesh shutter) and with Grill Window made of Outer Frame of Size 105 mm x 50 mm. Grill made of 10mm MS Square Rods for horizontal bars at a regular pitch of 150mm welded to MS flat of 12 x 6 mm.
814	BMT-P.40	i) Center Shutter Fixed: center shutter frame made of section with size 20mm x 47mm should be fitted with 5mm thick plain float glass of reputed make, EPDM gasket all around the glass and fixed to the Outer Frame with the supporting section of size 29mm x 20mm of 0.58mm thick	1 Sqm	5647
		fixed horizontally on top and bottom of the shutter frame.
815	BMT-P.41	ii) Center Shutter Sliding: center shutter frame made of section of size 20mm x 47mm should be fitted with 5 mm thick plain float glass of reputed make. The supporting guide section of size 15mm x 19mm of 0.58mm thick fixed horizontally at top and bottom of shutter frame and slides along the bottom and top guide tracks made of sections size 24mm x 20mm of 0.58mm thick and 29mm x 20mm of 0.58mm thick	1 Sqm	6183
816	BMT-P.42	iii) Center Fly mesh Shutter Sliding: Section for Fly mesh Shutter frame should be of size 20mm x 40mm of 0.58mm thick and fitted with SS mesh (304 Grade). The supporting guide section of size 29mm x 20mm of 0.58mm thick at the bottom and 15mm x 19mm of 0.58mm thick at the top fixed horizontally to the Fly mesh frame and slides along the bottom and top guide tracks made of sections size 20mm x 20mm of 0.58mm and 29mm x 20mm of 0.58mm.	1 Sqm	6183
		Window with 3 shutters (Center fixed shutter / Center sliding shutter / center Fly mesh shutter) and without Grill Window made of Outer Frame of size 90mm x 50mm.
817	BMT-P.43	i) Center Shutter Fixed: center shutter frame made of section with size 20mm x 47mm of 0.58mm thick should be fitted with 5mm thick plain float glass of reputed make, EPDM gasket all around the glass and fixed to the Outer Frame with the supporting section of size 29mm x 20mmof 0.58mm thick fixed horizontally on top and bottom of the shutter frame.	1 Sqm	5064
818	BMT-P.44	ii) Center Shutter Sliding: center shutter frame made of section with size 20mm x 47mm of 0.58mm thick should be fitted with 5 mm thick plain float glass of reputed make. The supporting guide section of size 15mm x 19mm of 0.58mm thick fixed horizontally at top and bottom of shutter frame and slides along the bottom and top guide tracks made of sections size 24mm x 20mm of 0.58mm thick and 29mm x 20mm of 0.58mm thick.	1 Sqm	5541
819	BMT-P.45	iii) Center Fly mesh Shutter Sliding: Section for Fly mesh shutter frame should be of size 20mm x 40mm and fitted with SS mesh (304 Grade). The supporting guide section of size 29mm x 20mm of 0.58mm thick at the bottom and 15mm x 19mm of 0.58mm thick at the top fixed horizontally to the Fly mesh frame and slides along the bottom and top guide tracks made of sections size 20mm x 20mm of 0.58mm thick and 29mm x 20mm of 0.58mm thick.	1 Sqm	5541
820 to 822	BMT-P.70 to P.72	ITEM DELETED
823	BMT-P.78	Providing and fixing factory made uPVC white colour casement/casementcum fixedglazed windows comprising of uPVC multi-chambered frame,sash and mullion (where ever required) extruded profiles duly reinforcedwith 1.60 ± 0.2 mm thick galvanized mild steel section made from
		rollforming process of required length (shape & size according to uPVCprofile), uPVC extruded glazing beads of appropriate dimension, EPDMgasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size forfixing frame to finished wall, plastic packers, plastic caps and necessarystainless steel screws etc. Profile of frame & sash shall be mitred cutand fusion welded at all corners, mullion (if required) shall be also fusionwelded including drilling of holes for fixing hardware's and drainage ofwater etc. After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealant over backer rod ofrequired size and of approved quality, all complete as per approveddrawing & direction of Engineer- in-Charge inclusive of cost of Single / double glass panes and silicon sealant . Note: For uPVC frame, sash and mullion extruded profiles minus 5%tolerancein dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be acceptedbut no extra payment on this account shall be made.
824	BMT-P.78.A	Casement window double panels with top fixed with S.S. frictionhinges (350 x 19 x 1.9 mm) made of (small series) frame47 x 50mm, sash 47 x 68 mm & mullion 47 x 68 mm allhaving wall thickness of 1.9 ± 0.2 mm and single glazing beadofappropriate dimension. ( Area of window upto 2.50 sqm).	Sqm	6283
825	BMT-P.78.B	Casement cum fixed panel window having both end single casement panel, middle fixed panels and at top completely fixed ventilator with S.S friction hinges (350 x 19 x 1.9) madeof (big series) frame 67 x 60 mm , sash 67 x 80 mm &mullion 67 x 80 mm all having wall thickness of 2.3 ± 0.2 mmand single glazing bead/double glazing bead of appropriatedimension. (Area of window above 3.00 sqm upto 5.00 sqm).	Sqm	6517
	BMT-P.79	Providing and fixing factory made uPVC white colour fixed glazedwindows / Ventilators comprising of uPVC multi- chambered frame andmullion (where ever required) extruded profiles duly reinforced with 1.60± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile),uPVC extruded glazing beads of appropriate dimension, EPDM gasket,G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plasticpackers, plastic caps and necessary stainless steel screws etc. Profileof frame shall be mitred cut and fusion welded at all corners, mullion (ifrequired) shall be also fusion welded including drilling of holes for fixinghardware's and drainage of water etc. After fixing frame the gap betweenframe and adjacent finished wall shall be filled with weather proof siliconsealant over backer rod of required size and of approved quality, allcomplete as per approved drawing & direction of Engineer-in-Charge inclusive of cost of Single / double
		glass panes and silicon sealant. Note: For uPVC frame, sash and mullion extruded profiles minus 5%tolerance in dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be accepted. But, no extra payment on this account shall be made.
826		Fixed windows / Ventilators made of (small series) frame 47 x 50mm & mullion 47 x 68 mm both having wall thickness of 1.9 ±0.2 mm and single glazing bead of appropriate dimension.	1 Sqm	5830
827	BMT-P.80	Providing and fixing factory made uPVC white colour sliding glazed windowupto 1.50 m in height dimension comprising of uPVC multi-chamberedframe with in-built roller track and sash extruded profiles duly reinforcedwith 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing beads anduPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (whitepowder coated) touch locks with hook, zinc alloy body with single nylonrollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mmsize for fixing frame to finished wall and necessary stainless steel screwsetc. Profile of frame & sash shall be mitred cut and fusion welded at allcorners, including drilling of holes for fixing hardware's and drainage ofwater etc. After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealent over backer rod ofrequired size and of approved quality, all complete as per approved drawing& direction of Engineer-in-Charge inclusive of cost of Single / double glass panes, wire mesh and silicon sealent . Note: For uPVC frame and sash extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be accepted. But no extra payment on this account shall be made.
828	BMT-P.80.A	Two track two panels sliding window made of (small series) frame 52 x 44 mm &sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm)	1 Sqm	6038
829	BMT-P.80.B	Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mmboth having wall thickness of 1.9 ± 0.2 mm and single glazingbead of appropriate dimension (Area of window upto 1.75 sqm).	1 Sqm	8058
830	BMT-P.80.C	Two track two panels sliding window made of (big series) frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension . (Area of window above 1.75 sqmupto 2.50 sqm).	1 Sqm	6220
831	BMT-P.81	Providing and fixing factory made uPVC white colour sliding	1 Sqm	6174
		glazed window above 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing beads, uPVCextruded interlocks and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle onone side of extreme panel along with zinc plated mild steel multi pointlocking having transmission gear with keeps, zinc alloy (white powdercoated) touch lock with hook (if required for wire mesh panel), stainlesssteel (SS 304 grade) body with adjustable double nylon rollers (weightbearing capacity to be 120 kg), G.I fasteners 100 x 8 mm size for fixingframe to finished wall and necessary stainless steel screws etc. Profileof frame & sash shall be mitred cut and fusion welded at all corners,including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shallbe filled with weather proof silicon sealent over backer rod of requiredsize and of approved quality, all complete as per approved drawing &direction of Engineer- in-Charge inclusive of cost of Single / double glass panes, wire mesh and silicon sealent . Two track two panels sliding window made of (big series) frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / doubleglazing bead of appropriate dimension. (Area of window above2.50 sqm upto 4.00 sqm.) Note: For uPVC frame and sash extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be accepted . But no extra payment on this account shall be made.
	III.SUB- SECTION	VENTILLATORS
		Providing and fixing of top hung Ventilators made of pre- painted steel (Base steel as per IS 513 of 0.80 mm thick galvanized as per IS 277 with Zinc of 120 GSM), finish painted with a polyester paint of 60-65 microns thick and section for outer frame of 80 x 45 mm, centre mullion of 80 x 60 mm, section for shutter of 52 x 25 mm x 0.6 mm thick, outer frame and mullions to have rebate for glazed shutter with a provision for guard bars/grills and the sections cut to length metre joined with corner bracket, centre mullion fixed with mullion cap, 1 No. of High grade nylon latch handle, window stopper, 2 nos. of with MS Powder coated /SS ball bearing butt Hinges provided per shutter and windows fitted with 4 mm thick plain float glass with rubber gaskets including fixing the frames in concrete/masonry wall by means of self expanding screws, Including 10 mm Square guard bars with 6” (152.4mm) pitch etc., complete for finished item of work.
832	BMT-P.56	Single openable ventilator shutter size of 2? 0” x 2? 0” (609.6 x 609.6mm) outer frame section size of 80 x 45mm, shutter frame section size of 52 x 25mm thick	1 sqm	5550
833	BMT-P.57	Double openable ventilator shutter Size of 4? 0” x 2? 0” (1219.2mm x 609.6mm) outer frame section size of 80 x 45mm,shutter frame section size of 52 x 25mm, vertical mullion section size of 80 x 60 mm	1 sqm	5550
834	BMT-P.58	Double openable fix shutter size of 4?0” x 3?0” (1219.2mm x 914.4mm) outer frame section size of 80 x 45mm , shutter frame section size of 52 x 25 mm ,Vertical mullion section size of 80 x 60 mm	1 sqm	5550
835	BMT-P.59	Single fixed Louvers Ventilator size of 2? 0” x 2? 0” (609.6 x 609.6mm) outer frame box section size of 80 x 45mm	1 sqm	3797
836	BMT-P.60	Double fixed Louvers ventilator Size of 4? 0” x 2? 0” (1219.2mm x 609.6mm) outer frame box section size of 80 x 45mm, vertical mullion section size of 80 x 60 mm	1 sqm	3797
837	BMT-P.61	Double fixed Louvers Ventilator size of 4?0” x 3?0” (1219.2mm x 914.4mm) outer frame box section size of 80 x 45mm , Vertical mullion section size of 80 x 60 mm	1 sqm	3797
		Note: The above rates are for normal finish, 10% extra may be allowed for Wood Grain finish
		Providing and fixing of top hung Ventilator with fly mesh made of pre-painted steel (Base steel as per IS 513 of 0.80 mm thick galvanized as per IS 277 with Zinc of 120 GSM), finish painted with a polyester paint of 60-65 microns thick and section for outer frame of 100 x 45 mm, centre mullion of 100 x 60 mm, section for shutter of 52 x 25 mm x 0.6 mm thick, section for fly-shutter of 52 x 25 mm x 0.6 mm thick and fitted with stainless steel 32 gauge fly mesh of 304 grade with 144 holes per sq.inch and mullions to have double rebate for glazed shutter and fly-shutter with a provision for guard bars/grills and the sections cut to length metre joined with corner bracket, centre mullion fixed with mullion cap, 1 No. of High grade nylon latch handle, window stopper, 2 nos. of with MS Powder coated /SS ball bearing butt Hinges provided per shutter and windows fitted with 4 mm thick plain float glass with rubber gaskets including fixing the frames in concrete/masonry wall by means of self expanding screws, Including 10 mm Square guard bars with 6” (152.4mm) pitch etc., complete for finished item of work.
838	BMT-P.62	Single openable ventilator shutter window size of 2? 0” x 2? 0” (609.6 x 609.6mm) outer frame section size of 100 x 45mm, Glazed and flymesh shutter frame section size of 52 x 25mm thick	1 sqm	6865
839	BMT-P.63	Double openable ventilator shutter window Size of 4? 0” x 2? 0” (1219.2mm x 609.6mm) outer frame section size of 100 x 45mm, Glazed and flymesh shutter frame section size of 52 x 25mm, vertical mullion section size of 100 x 60 mm	1 sqm	6865
840	BMT-P.64	Double openable fix shutter window size of 4?0” x 3?0”	1 sqm	6865
		(1219.2mm x 914.4mm) outer frame section size 100 x 45mm , Glazed and flymesh shutter frame section size 52 x 25 mm ,Vertical mullion section size of 100 x 60 mm
841	BMT-P.65	Single fixed Louvers Ventilator window size of 2? 0” x 2? 0” (609.6 x 609.6mm) outer frame box section size of 100 x 45mm, flymesh shutter frame section size 52 x 25 mm	1 sqm	4625
842	BMT-P.66	Double fixed Louvers ventilator window Size of 4? 0” x 2? 0” (1219.2mm x 609.6mm) outer frame box section size of 100 x 45mm, flymesh shutter frame section size 52 x 25 mm, vertical mullion section size of 100 x 60 mm	1 sqm	4625
843	BMT-P.67	Double fixed Louvers Ventilator window size of 4?0” x 3?0” (1219.2mm x 914.4mm) outer frame box section size 100 x 45mm , flymesh shutter frame section size 52 x 25 mm Vertical mullion section size of 100 x 60 mm	1 sqm	4625
		Note: The above rates are for normal finish, 10% extra may be allowed for Wood Grain finish
		Supplying and fixing of Top Hung Ventilators made of pre - painted steel (base steel as per IS 513 of -0.58 mm thick 'D" quality, galvanized as per IS 277 with zinc of 120 GSM) primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer, section for outer frame of 46 x 52 mm section and for shutter of 46 x 46 mm section for mullion 46 x 70 mm, The Ventilator to be panelled 4 mm pinhead glass with Ethyl propylene Diamine monomer Gasket (EPDM) and the sections cut to length mitre joined with corner brocket mullions fixed using mullion cap and with handle made of high grade aluminium powder coated and nylon receiver, corner brackets made of CRCA with Zinc Phosphate, Mullion caps made of glass filled nylon, frames fixed to the concrete /masonry wall by means of self expanding screws including 10 mm square guard bars with 6" pitch complete for finished item of work.
844	BMT-P.10	Ventilators: Top Hung 2 '-0" x 2'-0" (609.6x609.6mm) outer frame section size of 46mm x 52 mm shutter frame section size of 46mm x 46 mm	1 Sqm	6295
845	BMT-P.11	Ventilators: Top Hung 4 '-0" x 2'-0" (1219.2x609.6mm) outer frame section size of 46 x 52 m shutter frame section size of 46 x 46 mm Mullion section size of 46 x 70 mm	1 Sqm	6295
846	BMT-P.12	Ventilators: Top Hung 4'-0"x 3'-0" (1219.2x914.4mm) outer frame section size of 46 x 52m m shutter frame section size of 46 x 46 mm Mullion section size of 46 x 70 mm	1 Sqm	6295
		Supplying and fixing of Fixed Louvered Ventilators made of pre - painted steel (base steel as per IS 513 of -0.58 mm thick 'D" quality, galvanized as per IS 277 with zinc of 120 GSM) primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer, The section for louvered ventilators should be of of 33 x 56 mm Box section paneled with 4 mm pinhead glass with Ethyl
		propylene Diamine monomer Gasket (EPDM) and the sections cut to length mitre joined with corner bracket . corner brackets made of CRCA with Zinc Phosphate. The frames to be fixed to the concrete /masonry wall by means of self expanding screws including 10 mm square guard bars with 6" pitch complete for finished item of work.
847	BMT-P.13	Ventilators: Fixed louvers 2'-0" x 2'-0" (609.6x609.6mm)(Box section) outer frame section size of 33 x 56 mm	1 Sqm	4306
848	BMT-P.14	Ventilators: Fixed louvers 4'-0" x 2'-0" (1219.2 x 609.6 mm) (Box section) outer frame section size of 33 x 56 mm Mullion section size of 33 x 56 mm	1 Sqm	4306
849	BMT-P.15	Ventilators: Fixed louvers 4'-0" x 3'-0" (1219.2 x 914.4 mm) (Box section) outer frame section size of 33 x 56 mm Mullion section size of 33 x 56 mm	1 Sqm	4306
850 to 853	BMT-P.68 to P.75	ITEMS DELETED
854	BMT-P.77	Providing and fixing 3 Track 3 Shutter Pre painted Steel sliding Window/Door fabricated from roll formed sections made of Galvanized steel colour coated /powder coated (Base Steel as per IS 513 „D? quality galvanized as per IS 277 with Zinc of 120 Gms./ Sq.mtr) with total coated thickness of 0.58mm. Primer Coat with epoxy primer of 5-7 microns thick, finished paint with a polyester paint of 12-16 microns thick and back coated with Alkyd backer of 5-7 microns or powder coated with pure polyester powder up to 50-60 microns thick. The External Section for Three Track Three Sliding Shutter should be of 44 x 107mm with a provision for bottom track insert profile of 10x9 mm made of aluminium. Section for Window glass shutter should be of 35x49mm , Section for Window Euro groove should be of 25x24mm made of plastic to accommodate standard accessories, and section for window lap strip should be of 21x4mm made of plastic. Section for Mesh Shutter should be of 35x49mm. Section for Door shutter should be of 35x67mm, Section for Door Euro Groove 25x31mm made of plastic to accommodate standard accessories and size of lap strip should be of 39x41mm. The Window/Door to be panelled with 5mm thick plain float glass. The gaskets are to be made of Ethyl Propylene Diamine Manomer [EPDM]. Corner Brackets for internal and external frame to be made of glass filled nylon. Touch lock to be provided for Window Shutter. Sections are to be cut to length, joined and assembled by means of corner brackets. The above frame to be fixed to Brick/Concrete masonry by using Nylon self- expanding caps and driving MS electroplated 80mm screws into the caps through frames. The Grill for safety for windows to be made of 10mm thick square rod bars with 152mm pitch for complete item of work . For Door there will be no Safety Grill including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item of work.	1 Sqm	6818
	Q.SECTION	STRUCTURAL GLAZING
	I.SUB- SECTION	FIXED GLAZING
854	BMT-Q.08	ITEM DELETED
855	BMT-Q.09	ITEM DELETED
	II.SUB- SECTION	STRUCTURAL GLAING
856	BMT-Q.01	Providing and fixing Structural Glazing fabricated from Roll formed sections made of Pre-painted Steel / Powder coated (Base steel as per IS 513 of „D? quality, galvanized as per IS 277 with Zinc of 120 Gm/Sqm) with total coated thickness of 0.72 mm and the glass holding section made of 304 grade stainless steel of 0.58 mm thick galvanised steel section as stiffeners inside the colour coated steel powder coated sections as per the design requirement & calculations to suit wind pressures as given in IS: 875, the primer coat with epoxy primer of 5 – 7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with Alkyd backer of 5-7 microns or powder coated with pure polyester powder up to 50-60 microns thick and the vertical section of 50 mm x 99 mm x 0.72 mm, 33 mm x 56 mm x 0.72 mm for frame horizontal section, stiffener section of 47 mm x 97 mm x 1 mm, cover profiles sections of 20 mm x 58 mm x 0.58 mm, glass holding section of 37 mm x 37 mm & 37 mm x 18 mm including fixing 5mm thick Ocean Blue reflective glass, brackets made of CRCA powder coated/Electroplated to connect vertical to horizontal, vertical to slab, to fix verticals at top & bottom as per site requirement and gasket made of Ethyl Propylene Diamine Monomer, U.V. resistant silicon sealant including fixing in concrete/masonry wall with self-expanding cap & screws inclusive of cost and conveyance of all materials to site, all labour charges, incidental charges, cost of all consumables etc. and fixing charges complete for finished item of work.	1 Sqm	6625
857	BMT-Q.02	Providing and fixing Top Hung shutters in Structural Glazing fabricated from Roll formed sections made of Pre- painted Steel / Powder coated (Base steel as per IS 513 of „D? quality, galvanized as per IS 277 with Zinc of 120 Gm/Sqm) with total coated thickness of 0.72 mm and the glass holding section made of 304 grade stainless steel of 0.58 mm thick, duly providing stiffeners inside the colour coated steel/powder coated sections as per the design requirement, calculations to suit wind pressures as given in IS 875 and primer coat with epoxy primer of 5-7 microns thick and back coated with Alkyd backer of 5-7 microns or powder coated with pure polyester powder up to 50-60 microns thick and the outer frame of 20 mm x 58 mm x 0.58 mm, shutter sections of 57 mm x 33 mm x 0.72 mm, stiffener sections of 55 mm x 31 mm x 1mm, hinges – 2 Nos for each shutter and aluminium Stays – 2 Nos. for each shutter, aluminium Handle – 1 no. for each shutter including cost and conveyance of all materials to site, all labour charges,	1 Sqm	5355
		incidental charges, cost of all consumables etc. and fixing charges etc for finished item of work
	III	CURTAIN WALLING
858	BMT-Q.03	Supplying and fixing of curtain Glazing made of pre painted steel (base steel as per IS 513 of 0.58 mm thick D quality, galvanized as per IS 277 with Zinc of 120 GSM) Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12- 16 microns thick and back coated with 5-7 microns thick alkyd backer using the section for outer frame of 46 x 52 mm, section for mullion of 46 x 70 mm and section for beading of 18 x 25 mm and the glazing with 5 mm thick plain float glass fitted with Ethyl Propylene diameine Monomer (EPDM) gaskets and the sections cut to length, mitre joined with corner bracket, centre mullions fixed suing mullion cap inluding handle made of high grade Aluminium powder coated and nylon receiver, corner brackets made of CRCA with zinc phosphating, mullion caps made of Glass filled nylon including fixing the frames in the concrete / masonry wall with self expanding screws, etc., complete for finished item.- Fixed Glazing 2'-0" x 2'-0" (609.6x609.6mm) grid outer frames section size of 46 x 52 mm	1 Sqm	5466
859	BMT-Q.04	Mullion section size of 46 x 70mm Beading section size of 18 x 25 mm - Fixed Glazing 2'-0" x 3'-0" (609.6x914.4mm) grid outer frame section size of 46 x 52 mm	1 Sqm	5466
860	BMT-Q.05	Mullion section size of 46 x 70mm Beading section size of 18 x 25 mm Fixed Glazing 3'-0" x 3'-0" (914.4x914.4mm) grid outer frame section size of 46 x 52 mm	1 Sqm	4295
861	BMT-Q.06	Mullion section size of 46 x 70mm Beading section size of 18 x 25 mm Fixed Glazing 3'-0" x 4'-0" (914.4x1219.2mm) grid outer frame section size of 46 x 52 mm	1 Sqm	4295
862	BMT-Q.07	ITEM DELETED
	S.SECTION	DISMANTLING clearing away and carefully stacking materials useful for reuse.
863	BMT-S.01	Stone masonry in cement mortar	1 Cum	390
864	BMT-S.02	Terracing work in roofs or floors	10 Sqm	165
865	BMT-S.03	Flat stones in roof or floors including lifting	10 Sqm	143
866	BMT-S.04	Pan tiled or Mangalore tiled roof without roof timbers.	10 Sqm	120
867	BMT-S.05	Flat and pan tiles or Mangalore tiles over flat tiles without roof timbers	10 Sqm	143
868	BMT-S.06	Wrought and framed timber in roofs or floors	1 Cum	206
869	BMT-S.07	Old lime mortar plaster	10 Sqm	44
870	BMT-S.08	Old cement mortar plaster	10 Sqm	55
871	BMT-S.09	Dry rough stone revetment for aprons and stacking within 40 M lead	1 Cum	65
872	BMT-S.10	Revetment for aprons and stacking grouted within 40 lead	1 Cum	48
873	BMT-S.11	Kadapa slabs or Shahabad stone slabs flooring on sand bed	10 Sqm	66
874	BMT-S.12	Through scraping of old plastered surface	10 Sqm	44
875	BMT-S.13	Washing of plastered surface with soap, soda and water (or with soda lime and water)	10 Sqm	14
876	BMT-S.14	clean removal of lime plaster from walls and raking out joints 20mm deep or from terraced roof and raking out joints 100 mm deep	10 Sqm	44
877	BMT-S.15	Clean removal of cement plaster from walls and raking out joint 200 mm deep	10 Sqm	54
	T.SECTION	READY MIX CONCRETE		DELETED
	U.SECTION	EXPANSION JOINT FILLERS
878	BMT-U.01	Supply of high performance expansion joint filler board conforming to M.O.S.T - 18 mm THICK	1 Sqm	656
879	BMT-U.02	Supply of high performance expansion joint filler board conforming to M.O.S.T - 20 mm THICK	1 Sqm	735
880	BMT-U.03	Supply of high performance expansion joint filler board conforming to M.O.S.T - 25 mm THICK	1 Sqm	919
881	BMT-U.04	Supply of expansion joint filler board for buildings, columns, beams and slabs 20 mm THICK	1 Sqm	263
882	BMT-U.05	Supply of expansion joint filler board for buildings, columns, beams and slabs 25 mm THICK	1 Sqm	329
883	BMT-U.06	Supply of expansion joint filler board for buildings, columns, beams and slabs 50 mm THICK	1 Sqm	656
884	BMT-U.07	Supply of back up to cold applied sealant in construction and longitudinal joint - 10 mm OD	1 RM	11
885	BMT-U.08	Supply of back up to cold applied sealant in construction and longitudinal joint - 12 mm OD	1 RM	13
886	BMT-U.09	Supply of back up to cold applied sealant in construction and longitudinal joint - 15 mm OD	1 RM	15
887	BMT-U.10	Supply of back up to cold applied sealant in construction and longitudinal joint - 20 mm OD	1 RM	21
888	BMT-U.11	Supply of back up to cold applied sealant in construction and longitudinal joint - 25 mm OD	1 RM	27
	V.SECTION	LABOUR CHARGES
889	BMM-V.01	Bailing out water for earth work excavation /concrete for foundation below water level. (For building items only) -	1 cum	242
		Other than sandy soil - 0.0 M to 1.0 M
890	BMM-V.02	Bailing out water for earth work excavation /concrete for foundation below water level. (For building items only) - Other than sandy soil - 1.0 M to 2.0 M	1 cum	286
891	BMM-V.03	Bailing out water for earth work excavation /concrete for foundation below water level. (For building items only) - Other than sandy soil - 2.0 M to 3.0 M	1 cum	334
892	BMM-V.04	Bailing out water for earth work excavation / for concrete foundation below water level. (For building items only) Sandy soil - 0.0 M to 1.0 M	1 cum	384
893	BMM-V.05	Bailing out water for earth work excavation /for concrete foundation below water level. (For building items only) Sandy soil - 1.0 M to 2.0 M	1 cum	597
894	BMM-V.06	Bailing out water for earth work excavation /concrete for foundation below water level. (For building items only) Sandy soil - 2.0 M to 3.0 M	1 cum	721
895	BMM-V.07	Labour charges for making, fabricating office furniture, racks, work-station furniture, cup-board shutters with ply- wood/ MDF sheets, decolam/ veneer laminations including fixing cutting, making, assembling, fixing hinges, fixing fixtures, fixing locks, pasting sheets/ laminations fixing in position with necessary screws excluding cost of materials, accessories, fittings	1 Sqm	605
896	BMM-V.08	Labour charges for making, fabricating kitchen furniture, cup-boards with shutters, box cup-boards, box racks, with ply-wood/ MDF sheets, decolam/ veneer laminations including fixing cutting, making, assembling, fixing hinges, fixing fixtures, fixing locks, pasting sheets/ laminations fixing in position with necessary screws excluding cost of materials, accessories, fittings	1 Sqm	924
897	BMM-V.09	Rounding the edges of Kadapa / Shahabad stone slabs of any thickness including polishing the same	1 Rm	105
898	BMM-V.10	Half Rounding the edges of Marble/ Granite stone slabs of all thicknesses including polishing the same.	1 Rm	318
899	BMM-V.11	Full Rounding the edges of Marble/ Granite stone slabs of all thicknesses including polishing the same.	1 Rm	412
900	BMM-V.12	Machine Cutting charges - for Marble/ Granite slabs up to 50 mm thick by mechanical device.	1 RM	17
901	BMM-V.13	Flat nosing to Kadapa/ Shahabad stone slabs of any thick	1 Rm	50
902	BMM-V.14	Labour charges for fabricating steel works like Window Grills, Compound Wall Grills, Iron Doors, Windows including cost of welding rods, power charges, excluding cost of fixing in position	1 Kg	27
903	BMM-V.15	Labour charges for fixing Iron Doors, Iron Windows and Window Grills in position	1 Kg	5
904	BMM-V.16	Labour charges for fabricating all heavy steel works like Trusses, Stanchions, Heavy Beams and Girders including	1 Kg	24
		cost of welding rods, power charges, etc excluding cost of fixing in position
905	BMM-V.17	Labour charges for fixing heavy iron grills, Trusses, Stanchions, Heavy Beams and Girders erecting in position and fixing by using chain pulley blocks, Derek pole arrangements and cranes etc., complete in position	1 Kg	21
906	BMM-V.18	Labour charges for Fabrication of stainless steel railing works using stainless steel welding rods including buffing, polishing, lacquer finishing, to present seamless finish	1 Kg	131
907	BMM-V.19	Labour charges for Fabrication of stainless steel sheet cladding works using stainless steel welding rods including buffing, polishing, lacquer finishing, to present seamless finish	1 sqm	1756
908	BMM-V.20	Labour charges for Glass designing works on any thickness of Glass including fixing at site - Etching works	1 Sqm	955
909	BMM-V.21	Labour charges for Glass designing works on any thickness of Glass including fixing at site - Reverse Etching work	1 Sqm	1182
910	BMM-V.22	Labour charges for Glass designing works on any thickness of Glass including fixing at site - Acid wash works	1 Sqm	1477
911	BMM-V.23	Labour charges for fixing Flush door shutters of any thickness to the existing door frame including fixing the fixtures to the door shutter excluding cost of shutter	1 Sqm	383
912	BMM-V.24	Labour charges for fixing glass panes of any thickness to the existing door / window panes including fixing the beading excluding cost of beading	1 Sqm	286
913	BMM-V.25	Labour charges for wrought and put up including fixing in position frames of any size, shutters for doors, windows, ventilators including fixing all necessary fixtures etc. for Teak wood Fully panelled doors external or internal including frame	1 sqm	1570
914	BMM-V.26	Labour charges for wrought and put up including fixing in position frames of any size, shutters for doors, windows, ventilators including fixing all necessary fixtures etc. for Teak wood Glazed and panelled doors including fixing glass including frame	1 sqm	1484
915	BMM-V.27	Labour charges for wrought and put up including fixing in position frames of any size, shutters for doors, windows, ventilators including fixing all necessary fixtures etc. for Teak wood Framed and planked doors including frame	1 sqm	1302
916	BMM-V.28	Labour charges for wrought and put up including fixing in position frames of any size, shutters for doors, windows, ventilators including fixing all necessary fixtures etc. for Teak wood Ledged, braced and planked doors including frame	1 sqm	1028
917	BMM-V.29	Labour charges for wrought and put up including fixing in position frames of any size, shutters for doors, windows, ventilators including fixing all necessary fixtures etc. for Teak wood Flush type door shutter including frame	1 sqm	785
918	BMM-V.30	Labour charges for wrought and put up including fixing in position frames of any size, shutters for doors, windows, ventilators including fixing all necessary fixtures etc. for Teak wood Windows glazed including outer frame and shutter frame	1 sqm	1005
919	BMM-V.31	Labour charges for wrought and put up including fixing in position frames of any size, shutters for doors, windows, ventilators including fixing all necessary fixtures etc. for Teak wood Windows panelled including outer frame and shutter frame	1 sqm	1515
920	BMM-V.32	Labour charges for wrought and put up including fixing in position frames of any size, shutters for doors, windows, ventilators including fixing all necessary fixtures etc. for Teak wood Windows ledged, braced and planked including outer frame	1 sqm	1034
921	BMM-V.33	Labour charges for wrought and put up including fixing in position frames of any size, shutters for doors, windows, ventilators including fixing all necessary fixtures etc. for Teak wood Windows framed and planked including outer frame and shutter frame	1 sqm	1237
922	BMM-V.34	Labour charges for wrought and put up including fixing in position frames of any size, shutters for doors, windows, ventilators including fixing all necessary fixtures etc. for Teak wood Ventilators glazed, fixed with double frame with wire netting including frame	1 sqm	833
923	BMM-V.35	Labour charges for wrought and put up including fixing in position frames of any size, shutters for doors, windows, ventilators including fixing all necessary fixtures etc. for Teak wood Swing ventilators glazed including outer frame and shutter frame	1 sqm	1053
924	BMM-V.36	Labour charges for wrought and put up including fixing in position frames of any size, shutters for doors, windows, ventilators including fixing all necessary fixtures etc. for Teak wood Weld mesh doors and windows including outer frame and shutter frame	1 sqm	592
925	BMM-V.37	Labour charges for wrought and put up including fixing in position frames of any size, shutters for doors, windows, ventilators including fixing all necessary fixtures etc. for Teak wood G.I or .AC sheet door & windows including outer frame and shutter frame	1 sqm	689
926	BMM-V.38	Labour charges for wrought and put up including fixing in position frames of any size, shutters for doors, windows, ventilators including fixing all necessary fixtures etc. for Other than teakwood Fully panelled doors external or internal including frame	1 sqm	1452
927	BMM-V.39	Labour charges for wrought and put up including fixing in position frames of any size, shutters for doors, windows, ventilators including fixing all necessary fixtures etc. for Other than teakwood Glazed and panelled doors including fixing glass including frame	1 sqm	1388
928	BMM-V.40	Labour charges for wrought and put up including fixing in position frames of any size, shutters for doors, windows, ventilators including fixing all necessary fixtures etc. for Other than teakwood Framed and planked doors including frame	1 sqm	1204
929	BMM-V.41	Labour charges for wrought and put up including fixing in position frames of any size, shutters for doors, windows, ventilators including fixing all necessary fixtures etc. for Other than teakwood Ledged, braced and planked doors including frame	1 sqm	942
930	BMM-V.42	Labour charges for wrought and put up including fixing in position frames of any size, shutters for doors, windows, ventilators including fixing all necessary fixtures etc. for Other than teakwood Flush type door shutter including frame	1 sqm	754
931	BMM-V.43	Labour charges for wrought and put up including fixing in position frames of any size, shutters for doors, windows, ventilators including fixing all necessary fixtures etc. for Other than teakwood Windows glazed including outer frame and shutter frame	1 sqm	940
932	BMM-V.44	Labour charges for wrought and put up including fixing in position frames of any size, shutters for doors, windows, ventilators including fixing all necessary fixtures etc. for Other than teakwood Windows panelled including outer frame and shutter frame	1 sqm	1401
933	BMM-V.45	Labour charges for wrought and put up including fixing in position frames of any size, shutters for doors, windows, ventilators including fixing all necessary fixtures etc. for Other than teakwood Windows ledged, braced and planked including outer frame	1 sqm	957
934	BMM-V.46	Labour charges for wrought and put up including fixing in position frames of any size, shutters for doors, windows, ventilators including fixing all necessary fixtures etc. for Other than teakwood Windows framed and planked including outer frame and shutter frame	1 sqm	1143
935	BMM-V.47	Labour charges for wrought and put up including fixing in position frames of any size, shutters for doors, windows, ventilators including fixing all necessary fixtures etc. for Other than teakwood Ventilators glazed, fixed with double frame with wire netting including frame	1 sqm	810
936	BMM-V.48	Labour charges for wrought and put up including fixing in position frames of any size, shutters for doors, windows, ventilators including fixing all necessary fixtures etc. for Other than teakwood Swing ventilators glazed including outer frame and shutter frame	1 sqm	1012
937	BMM-V.49	Labour charges for wrought and put up including fixing in position frames of any size, shutters for doors, windows, ventilators including fixing all necessary fixtures etc. for Other than teakwood Weld mesh doors and windows including outer frame and shutter frame	1 sqm	563
938	BMM-V.50	Labour charges for wrought and put up including fixing in position frames of any size, shutters for doors, windows, ventilators including fixing all necessary fixtures etc. for Other than teakwood G.I or .AC sheet door & windows including outer frame and shutter frame	1 sqm	658
939	BMM-V.51	Grooves 2-3 mm	1 Rm	55
	W.SECTION	MISCELLANEOUS ITEMS
940	BMS-W.01	Supplying Aluminium anodised Sections for Doors, partitions, windows, Ventilators (including annodization cost)	1 Kg	306
941	BMS-W.02	Sun Control film to the glazed windows partition including labour charges.	1 sqm	313
942	BMS-W.03	Aluminium Venetian Blinds horizontal 25.4 mm wide with all accessories.	1 sqm	798
943	BMS-W.04	Aluminium Venetian Blinds horizontal 20.0 mm wide with all accessories.	1 sqm	760
944	BMS-W.05	Venetian blinds Vertical blinds 100 mm wide with all accessories.	1 sqm	1290
945	BMS-W.06	Rubber Beading	1 RM	2
946	BMS-W.09	Chlorpyriphos/ Lindane emulsifiable concentrate of 20%	1 Litre	217
947	BMS-W.10	Soft Brush	Each	141
948	BMS-W.11	Wire Brush	Each	31
949	BMS-W.12	Supplying and fixing aluminium composite cladding with skin material 0.25 mm thick aluminium sheet cover material natural polyethylene aluminium cladding panel fixed with extruded aluminium basis frame (50x25x1.5mm) angle cleats, weather sealants, rivets, GI brackets all as approved, using suitable bolts on structural steel work including necessary accessories complete in all respects including all scaffolding and labour charges etc., complete for finished item of work but excluding cost of structural steel fabrication, if any, ACP Cladding - 3 mm thk	1 Sqm	2189
950	BMS-W.13	Supplying and fixing aluminium composite cladding with skin material 0.25 mm thick aluminium sheet cover material natural polyethylene aluminium cladding panel fixed with extruded aluminium basis frame (50x25x1.5mm) angle cleats, weather sealants, rivets, GI brackets all as approved, using suitable bolts on structural steel work including necessary accessories complete in all respects including all scaffolding and labour charges etc., complete for finished item of work but excluding cost of structural steel fabrication, if any, ACP Cladding - 4 mm thk	1 Sqm	2387
951	BMS-W.14	Supplying and fixing aluminium composite cladding with skin material 0.5 mm thick aluminium sheet cover material natural polyethylene aluminium cladding panel fixed with extruded aluminium basis frame (50x25x1.5mm) angle cleats, weather sealants, rivets, GI brackets all as approved, using suitable bolts on structural steel work including	1 Sqm	2678
		necessary accessories complete in all respects including all scaffolding and labour charges etc., complete for finished item of work but excluding cost of structural steel fabrication, if any, ACP Cladding - 4 mm thk
952	BMS-W.15	CEMENT JALI - 25 mm thick	1 sqm	191
953	BMS-W.16	CEMENT JALI - 40 mm thick	1 sqm	248
954	BMS-W.17	CEMENT JALI - 50 mm thick	1 sqm	340
955	BMS-W.18	Aluminium sheet 24 Gauge	1 Sqm	256
956	BMS-W.19	7.5mm thick Aluminium Grill (as approved by the department) 3.58 Kg/Sqm.	1 Sqm	941
957	BMS-W.20	Mastic pad 2'0 " x 4'0" (0.60M x 1.2M) of 1" (25.4 mm ) thick	1 Sqm	839
958	BMS-W.21	Mastic pad 2'0 " x 4'0" (0.60M x 1.2M) of 1/2" (12.7 mm ) thick	1 Sqm	481
		Supply of hot pressed compression moulded sign plates for making road signs ass per the approved dimensions of National Highway Authority Of India, complete, for finished item of work.
959	BMS-W.22	Circular sign plate Dia 400mm.	Each.	488
960	BMS-W.23	Circular sign plate Dia 600mm.	Each.	1284
961	BMS-W.24	Circular sing plate Dia 870mm	Each.	2574
962	BMS-W.25	Triangular sign plate 600mm.	Each.	659
963	BMS-W.26	Triangular sign plate 900mm.	Each.	1489
964	BMS-W.27	Square sign plate 600mm.	Each.	1194
965	BMS-W.28	Square sign plate 1000mm.	Each.	4433
966	BMS-W.29	ITEM DELETED

Engineering Info :

BUILDING CIVIL ITEMS-3